Toussi ABDERRAHIM

En résumé

Entreprises

• Atlascopco Maroc - Technicieb sav

  Casablanca 2016 - maintenant

• TTM ( tronsport terassemebt minier) - Mécanicien chef garage TP

  2015 - 2015 Société: TTM ( tronsport terassement minier) Républic of Guinea
        Rooster: 6 month / 1 month
        Rapport to Site manager
  - Manage a team of 10 Mechanics
  - Perform preventive and corrective maintenance of a fleet of machines composed of 03dozer D6H D9N D9R, 02 grader 140G/140H
  02 excavators volvo, 06compactor Maxcom, 03 wheel lowder Cat 990C 980G 980H, 12 trucks Iveco trakker
  -Perform periodic inspections on the machines under my supervision. 
  -Carry out technical diagnostics on machines using the documentation and measurement tools. 
  -Assist the team during major maintenance interventions. 
  -En joy the time off to inspect and repair the machines to reduce downtime during production and increase availability. 
  -Ensure that all operations are conducted in a clean respecting safety. 
  -Troubleshoot and repair machines in the workshop according to the program of maintenance and also in mine. 
  - Fill-daily reports of interventions.  -In charge of the training and supervision of local mechanics juniors. 
  -Respect and enforce the rules of safety in the mine. 

• SMT groupe - Technical support supervisor

  2013 - 2014 Company: SMT Swedish Machinery and Truck (volvo dealer) Republic Democratic
  Work Roster : 5 Month / 1 Month
  Report to Regional technical Director
  Project Assign:
  Duties and Responsibilities:
  
  * Following safety rules and regulations. ;
  * Visit the machine at the pit and get machine status whether the machine is subject to stop if there's a problem or send for work if the machine is in good condition. ;
  * Sending report to the technical director about the machine status whether the machine is breakdown or even at work. ;
  * Arranging people for every problem either mechanical or electrical. ;
  * Making quick solution for every machine problem. ;
  * Supervise them while they are working at the machine and giving proper instruction or any correction if needed. ;
  * Perform the job and teach the proper way if it is hard for them to fix. ;
  * Taking MATRIS read using computer once the machine in trouble to see status. ;
  * Fixing machine problem using PROSIS et TECH TOOL VCADS Pro if needed. ;
  * Explain of displayed error codes using the computer with VOLVO program. ;
  * Adjust pump flow using flow meter when the component related for this is moving or turning slow nor too fast. ;
  * Adjust relief pressure using pressure gauge to set pressure base on the specification. ;
  * Troubleshooting machine problems. ;
  * Making quick decision once the machine is breakdown if it is to fix at the pit garage or send to main workshop for big repair. ;
  * Making decision of the parts if it is possible to repair or need to change new one. ;
  * Taking spare-parts from the store. ;
  * Writing report for the whole day work and replaced parts. ;
  * Performing preventive maintenance at any machine to avoid breakdown and to maintain machine performance. ;
  * Fixing electrical trouble. ;
  * Rebuilt Hydraulic transmission and dropbox of A35E\A40E\A40D\A40F...Greader G990 Loader 220 G... ;
  * Rebuilt volvo engine D12D\C...
  * Rebuilt old machines.

• JA DELMAS, Concessionnaire CATERPILLAR - Maintenance technician SKFX DRILL / Bucyrus 340RH & 6060 FS CAT

  Bordeaux 2012 - 2013 1. Conduct daily physical inspection of assigned equipment used by operation to ensure that safety procedures are carried out.
  2. Conduct daily monitoring and controlling activities of assigned equipment to ensure that the status of the equipment is up to date.
  3. Plan, control and provide assistance to activities related to planning, programming and execution of predictive, preventive and corrective mechanical maintenance of facilities, machines and equipment, aimed at meeting production and quality goals.
  4. Monitor backlogs for machinery product modification, repair/maintenance and spare parts replacement to ensure that all equipment performance achieves the requirements and the backlogs are not delayed.
  5. Formulate and develop planned program of work for maintenance improvements, upgrades and breakdown/shutdown.
  6. Conduct and analyze fault diagnostic for all repairs, maintenance activities and develop systems improvement on predictive maintenance program aligned with On the Job Training in order to provide a proper and continuous handling of machinery problems as well as to ensure correct application of preventive maintenance.
  7. Assist the team to execute difficult task when the shovel and drill machine are in trouble, Diagnose and analyze these machine troubles. Make suggestions to prevent the same from happening in future.
  9. Provide expertise on developing any required facilities (e.g., fuel station, truck wash bay, shop support, etc.) to ensure that facilities are within compliance.
  10. Maintain proper working conditions in the field in order to implement the standard operational procedures accordingly.
  11. Implement safety standards and procedures within work area to minimize accident and damage.
  12. Provide technical instructional support to national employees for relevant maintenance activities as guidance to ensure that all work complies with international standard, are completed in safe manner, within budget, and on schedule.
  13. Contribute to the team's motivation and performance optimization by presenting professional advice and recommendations on leadership and supervisory roles (i.e. manpower management, work arrangement, job assignment) to improve supervisory skill of national employees.
  

• Managem - Maintenance Technician

  Casablanca 2012 - 2012 Company: CMG, Compagnie Miniere des Guemmassa, Mining Company Guemmassa
  El massira El khadra, Casablanca, Morocco
  Report to: Fleet Maintenance Responsible
  Project Assigned: CMG, Mine Hajjar, Marrakech, Morocco
  
  Contract: permanent
  
  Duties and
  Responsibilities:
  - manage a parc of 5 indergound drill core machines
  1. Conduct daily physical inspection of assigned equipment used by operation to ensure that safety procedures are carried out.
  2. Conduct daily monitoring and controlling activities of assigned equipment to ensure that the status of the equipment is up to date.
  3. Conduct and analyze fault diagnostic for all repairs, maintenance activities and develop systems improvement on predictive maintenance program aligned with On the Job Training in order to provide a proper and continuous handling of machinery problems as well as to ensure correct application of preventive maintenance.
  4. Assist the team to execute difficult task when the Diamond drill machine and underground earth moving machine are in trouble, Diagnose and analyze these machine troubles. Make suggestions to prevent the same from happening in future.
  5. Implement safety standards and procedures within work area to minimize accident and damage.
  6. Contribute to the team's motivation and performance optimization by presenting professional advice and recommendations on leadership and supervisory roles (i.e. manpower management, work arrangement, job assignment) to improve supervisory skill of national employees.
  7. Develop written programs, train, coach and mentor local work force/mechanics to improve their skills, knowledge and c

• Managem - Maintenance Technician

  Casablanca 2006 - 2012 Twin center Avenue El massira El khadra, Casablanca, Morocco
  
  Report to: Fleet Maintenance Responsible
  Project Assigned: Techsub, Mine Hajjar, Marrakech, Morocco

Formations

• ECOLE PRATIQUE DES MINES DE TOUISSIT (Oujda)

  Oujda 2004 - 2006 Technician electromechanical
  
  : Technicien electromechanical, Schools of Mining

Réseau

• Carreaux CIMENT

• Edmond NIEPSUJEWICZ

• Eline NDINGA

• Gaetan FAUQUEUR

• John KASHALA

• Léopold GNAME

• Najib BRAHIM

• Noureddine ELASRI

• Othmane BRICHA